Panasonic MX-SS1

EN18
Problem Cause and Action
The appliance does
not turn on.
•The power plug is not in the outlet.
 Plug in firmly.
● When you are making action below, unplug.
The ingredients are
not blending.
•The quantity of the ingredients are too much.
 Reduce the quantity of the ingredients.
•The ingredients are too large.
 Cut them into smaller pieces.
•Using hard ingredients.
 Remove the hard ingredients.
•Using improper speed. (MX-SS1 only)
 Adjust speed by turning the speed control.
•The blade may be damaged.
 Contact the service centre.
Abnormal noise
occur.
•Using hard ingredients.
 Remove the hard ingredients.
•The motor housing may not be securely attached.
 Re-attach the motor housing.
(P.
EN8, EN9)
•The chopper lid is not close firmly.
(P.
EN9) (MX-SS1 only)
 Re-close the chopper lid.
Abnormal vibration
occur.
•The quantity of the ingredients are too much.
 Reduce the quantity of the ingredients.
•The ingredients are too large.
 Cut them into smaller pieces.
•Using hard ingredients.
 Remove the hard ingredients.
The attachment is
not able to attach.
•The attachment is not attached properly.

Re-attach it. (P. EN8, EN9 )
If it is still not able to be attached, contact service
centre.
Troubleshooting
MX-SS1_MX-GS1_ASIA.indb 18 2013/10/11 9:37:42