Panasonic MX-SS1

EN19
Specifications
MX-SS1 MX-GS1
Power supply
220 - 240
V
50 - 60 Hz
Power consumption 600
W
Speed control V
ariable speed control –
Operation rating
Blender 2
consecutive cycles of 1 min. ON, then 3 min. OFF
Chopper
2 consecutive cycles of
1
min. ON, then 3 min. OFF
–
Whisk
2 consecutive cycles of
2
min. ON, then 3 min. OFF
–
Dimensions
(Motor housing +
attachment)
(W  D  H) (approx.)
Blender
6.4  7.0  39.7 cm 6.4  7.0  39.7 cm
Chopper
14.7  14.7  36.9 cm
–
Whisk
6.0  6.8  45.7 cm
–
Mass (Motor housing +
attachment) (approx.)
Blender 1.0
k
g 1.0
k
g
Chopper 1.2
k
g –
Whisk 1.0
k
g –
Length of the power cord (approx.) 1.3
m
Replacement Parts
Part name Part number
Beaker AMD02-236
Chopper bowl AMD01-236
 Fix the wall bracket on the firm wall properly. If it is fix on fragile surface such as
sheetrocks, it may be loose up easily and cause the blender to fall or damage to the wall.
1
Drill two holes (depth of plastic tube's length)
in the wall. (Refer to illustration for dimension.)
2
Hammer two plastic tubes into the holes.
3
Secure the wall bracket on the wall with two
screws.
51 mm
6 mm
Fixing the wall bracket
MX-SS1_MX-GS1_ASIA.indb 19 2013/10/11 9:37:42