What to do if the Panasonic NA - 147VC6 Washer is unable to drain?
If your Panasonic Washer is unable to drain, inspect the drain hose for clogs, immersion in water, extensions with joints, or freezing. Also, clean the drain filter if it is clogged.
What to do if the Panasonic NA - 147VC6 Washer door is open?
If the door of your Panasonic Washer is open, ensure that it is closed properly.
What to do if the electricity supply cuts out while my Panasonic NA - 147VC6 Washer is on?
If the electricity supply cuts out while your Panasonic Washer is on, the appliance will stop operating. When power is restored, it will resume operation from the point where it stopped.
What to do if a circuit breaker trips and the electricity supply is cut for Panasonic NA - 147VC6 Washer?
If a circuit breaker trips and the electricity supply is cut for your Panasonic Washer, the appliance will stop operating. When the breaker is reset, it will resume operation from the point where it stopped. It is recommended to determine the reason for the breaker tripping and take steps to resolve it.
What to do if the water supply is disrupted for Panasonic NA - 147VC6?
If the water supply to your Panasonic Washer is disrupted, be aware that when the water supply returns, it may initially be impure. Disconnect the water supply hose and drain the impure water through the tap. Ensure the water supply hose is reconnected before using the appliance.
What to do if there is overflow in my Panasonic Washer?
If there is an overflow in your Panasonic Washer, check if the water supply valve or the water supply valve triac has failed. Switch off and unplug the appliance, shut off the tap, and contact your local Customer Service Centre.
Why is there an unusual noise or vibration in my Panasonic NA - 147VC6?
An unusual noise or vibration in your Panasonic Washer could be due to metal items in the drum, the anchor bolts not being removed, or the appliance being on a sloping or unstable surface. If none of these are the cause, contact your local Customer Service Centre.
Why does the displayed remaining time change on my Panasonic Washer?
The displayed remaining time on your Panasonic Washer changes because the time is estimated and corrected continually. Thus, the displayed time may vary.
Why is the display not clear on my Panasonic Washer?
The display on your Panasonic Washer may not be clear if the appliance is in a brightly lit or sunlit area.
Safety guidelines for the power source, mains lead, plug, and extension cable usage.
Instructions to prevent injury from appliance operation, hot parts, and moving drum.
Step-by-step guide to select a programme, start the wash, and post-wash care.
Troubleshooting common issues with washing, rinsing, spinning, and detergent use.
Solutions for time display changes, noise, vibration, power, and display problems.
Explanation of error codes displayed on the machine and corrective actions.
Instructions for connecting water supply, drain hoses, and the power supply.
General| Washing class | B |
|---|---|
| Annual water consumption washing | 10346 L |
| Annual energy consumption washing | 195 kWh |
| Drum capacity | 7 kg |
| Cycle time (max) | 205 min |
| Delay start (max) | 24 h |
| Spin-drying class | A |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 76 dB |
| Noise level (wash) | 58 dB |
| Delayed start timer | Yes |
| Energy consumption washing per cycle | 1.05 kWh |
| Door hinge | Left |
| Drum volume | 50 L |
| Display type | LCD |
| Loading type | Front-load |
| Product color | White |
| Door opening angle | 140 ° |
| Appliance placement | Freestanding |
Weight and Dimensions| Depth | 527 mm |
|---|---|
| Width | 597 mm |
| Height | 845 mm |
| Weight | 72000 g |
To Next Page