39
11.7. Motor (For NA-127VB3 and NA-147VB3)
The washing machine has an asynchronous motor. It is controlled by the PCB.
It is essential to check the motor for correct diagnosis and quick servicing. In the below picture, socket points on the motor is shown
to measure with multimeter.
Motor Socket Terminals
Tacho and stator (full field-half field) ohm resistance values for the motor types are listed in the below table.
Resistance values for the motor types
11.7.1. Resistance Controlling By Connec-
tion Measurement (Tacho)
You can determine the ohm value by measuring from the pink
cable at 16th and red cable at 6th position in the large socket
(refer to 13 Wiring Connection Diagram) as shown in belows
figures. For resistance values, refer to the table.
11.7.2. Resistance Controlling By Connec-
tion Measurement (Stator)
You can determine the ohm value by measuring from the brown
cable at 8th and black cable at 18th position in the large socket
(refer to 13 Wiring Connection Diagram) as shown in belows
figures. For resistance values, refer to the table.
MOTOR CODE SUPPLIER STATOR (FULL FIELD) (ohm) TACHO (ohm) TEMPERATURE
32013066 ANAIMEP 1.2 Ω ±0,08 180 ±20 20 °C - 25 °C
To Next Page
Loading...
