Why do foam and water remain in the door of my Panasonic NA-148VB3?
If foam and water remain in the door or door seal of your Panasonic Washer, although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected, so no action is needed.
Why is no water going into my Panasonic Washer?
If your Panasonic Washer isn't getting water, the issue might be a closed water tap. Make sure to turn on the water tap. Alternatively, the water-supply hose could be frozen, in which case you should thaw it. The water supply itself may also be disrupted, so check the water supply. Finally, the water-supply filter may be clogged, so try cleaning it.
Why does fabric softener overflow in my Panasonic Washer?
If fabric softener overflows in your Panasonic Washer, it might be because the softener level exceeded the MAX level for the detergent drawer. Make sure you do not exceed the MAX level. You may have also spilled the liquid by closing the detergent drawer too strongly, so close the detergent drawer gently.
Why do the buttons not work on my Panasonic NA-148VB3 Washer?
If the buttons on your Panasonic Washer aren't working, it could be because you're trying to change settings while a wash is in progress. Check if washing is in progress. Another possibility is that the child lock is activated, so deactivate the child lock.
How to prevent powdered detergent residue after wash in Panasonic Washer?
If powdered detergent residue remains after the wash in your Panasonic Washer, you may have put powdered detergent directly into the drum. Put powdered detergent in the detergent drawer instead.
Why does the spin cycle repeatedly start and stop on my Panasonic Washer?
If the spin cycle on your Panasonic Washer repeatedly starts and stops, this is normal; intermittent spinning helps the spin process to operate quietly. If the laundry may be too light, add one or two bath towels.
Why is there no foam in my Panasonic Washer?
If your Panasonic Washer isn't producing enough foam, it could be due to the water's temperature, level and softness. Make sure you have correct water conditions. You may have put powdered detergent directly into the drum; put it in the detergent drawer instead. You might also not be using enough detergent, so increase the amount. It's also possible you're using a reduced-foam detergent, so switch to a regular one. Heavily soiled laundry or larger loads can also reduce foam, so reduce the load size.
How to reduce excessive foam in my Panasonic Washer?
If there's too much foam in your Panasonic Washer, it could be due to the water's temperature, level, or softness. Try to ensure correct water conditions. You might also be using too much detergent, so reduce the amount. The type of detergent could also be the culprit, so consider changing to a low-foam detergent.
Why is my Panasonic Washer not draining water?
If your Panasonic Washer isn't draining water, the drain hose might be obstructed or bent, so check it. Also, the pump filter could be obstructed, and it needs cleaning. Ensure that clothes are placed inside the machine in a well-balanced manner.
Why is my Panasonic NA-148VB3 Washer machine not operating?
Your Panasonic Washer might not be operating due to several reasons. It could be unplugged, so ensure it is properly inserted into the socket. The fuse might be defective and needs changing. Check if you've pressed the Start/Pause button. Also, the program knob should be on the desired setting, not in the '0' (off) position. Ensure the door is properly shut until you hear a click. Finally, the child lock might be active; refer to section 6.5 for deactivation instructions.
Safety guidelines for general operation, supervision, and potential hazards.
Safety instructions related to the power cord, plug, and electrical connections.
Warnings and precautions to prevent physical injury during operation or maintenance.
Cautions regarding improper use, connections, and handling of laundry.
Step-by-step guide on how to set up and start a wash cycle.
A table listing common problems, their causes, and solutions.
Explains error codes displayed on the machine and what actions to take.
General| Water consumption per cycle | 50 L |
|---|---|
| Energy consumption washing per cycle | - kWh |
| Door hinge | Left |
| Display type | LCD |
| Loading type | Front-load |
| Product color | White |
| Appliance placement | Freestanding |
| Timer | Yes |
| Drum capacity | 8 kg |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 16 |
Weight and Dimensions| Depth | 594 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Door opening diameter | 340 mm |
To Next Page
