Why do the buttons on my Panasonic Washer not work?
If the buttons on your Panasonic Washer aren't working, it could be because the programme, temperature, and process settings cannot be changed while washing is in progress (the rinse or spin settings can be changed). The child safety lock may also be activated.
What to do if the Panasonic Washer door does not open?
If the door of your Panasonic Washer won't open, the door lock or the child safety lock may be activated. Also, the water temperature or level may be too high.
Why does water drain out during washing in my Panasonic Washer?
It's normal for water to drain and build up during washing. This is because the Panasonic Washer has a foam detection feature that washes away excess foam.
How to get rid of unusual odour from Panasonic NA-148VG4?
If your Panasonic Washer has an unusual odour, rubber parts may give off a smell when you start using the appliance, but the smell will go away over time. You can also wash the drum by running the 90 °C programme.
Why does water build up during the washing in my Panasonic NA-148VG4 Washer?
If water builds up during the washing cycle of your Panasonic Washer, this is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
Why does water drain out during the washing in my Panasonic NA-148VG4 Washer?
If water drains out during the washing cycle of your Panasonic Washer, this is normal; the water frequently drains out and builds up in order to wash away excess foam. This feature is called foam detection.
Why is there a lot of foam in my Panasonic NA-148VG4 Washer?
The amount of foam can vary depending on the temperature, level, and softness of the water. You may have also used too much detergent, or the type of detergent you're using might be causing excess foam.
Why does water build up during washing in my Panasonic NA-148VG4?
It's normal for water to build up during the washing process. If the amount of water has decreased, the Panasonic Washer will automatically supply more. For heavy loads, this may happen repeatedly.
Why does no water flow into the appliance during the rinse process of my Panasonic Washer?
Before rinsing, the appliance spins to drain out remaining water. The water will fill up after that.
Why does the spin process repeatedly start and stop in my Panasonic Washer?
This is normal; intermittent spinning of the tub helps the spin process to operate quietly. The laundry may be too light. If so, add one or two bath towels.
General| Water consumption per cycle | - L |
|---|---|
| Energy consumption washing per cycle | 0.66 kWh |
| Annual water consumption washing | 9750 L |
| Annual energy consumption washing | 127 kWh |
| Door color | Black |
| Door hinge | Left |
| Water fill | Cold |
| Drum volume | 70 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 150 ° |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Cycle time (max) | 225 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
| Door opening diameter | 340 mm |
To Next Page
