What to check if my Panasonic NA-148VG4 is unable to supply water?
Check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water supply filter is clogged. After correcting the problem, open and close the door, and then start the wash again. If the red mark appears in the hose with a water supply valve, the water supply has stopped and you should replace it with a new hose.
How to troubleshoot a Panasonic NA-148VG4 Washer that is unable to drain?
If your Panasonic Washer is unable to drain, check the drain hose for clogs, ensure its tip isn't immersed in water, that it doesn't extend further than 3 m, and that the water isn't frozen. Also, clean the drain filter if it's clogged. After correcting the problem, open and close the door, and then start the wash again.
How to fix Panasonic Washer buttons that do not work?
If the buttons on your Panasonic Washer aren't working, it could be because the programme, temperature, and process settings cannot be changed while washing is in progress (rinse and spin settings can be changed). Alternatively, the child safety lock may be activated.
Why does water drain out during the washing in my Panasonic NA-148VG4 Washer?
If water drains out during the washing cycle of your Panasonic Washer, this is normal; the water frequently drains out and builds up in order to wash away excess foam. This feature is called foam detection.
Why does water build up during the washing in my Panasonic NA-148VG4 Washer?
If water builds up during the washing cycle of your Panasonic Washer, this is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
How to get rid of unusual odour from Panasonic NA-148VG4?
If your Panasonic Washer has an unusual odour, rubber parts may give off a smell when you start using the appliance, but the smell will go away over time. You can also wash the drum by running the 90 °C programme.
Why does water drain out during washing in my Panasonic Washer?
It's normal for water to drain and build up during washing. This is because the Panasonic Washer has a foam detection feature that washes away excess foam.
What to do if the Panasonic Washer door does not open?
If the door of your Panasonic Washer won't open, the door lock or the child safety lock may be activated. Also, the water temperature or level may be too high.
General| Water consumption per cycle | - L |
|---|---|
| Energy consumption washing per cycle | 0.66 kWh |
| Annual water consumption washing | 9750 L |
| Annual energy consumption washing | 127 kWh |
| Door color | Black |
| Door hinge | Left |
| Water fill | Cold |
| Drum volume | 70 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 150 ° |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Cycle time (max) | 225 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
| Door opening diameter | 340 mm |
To Next Page
