K
Kara WilliamsSep 12, 2025
Why does the drum stop and rotate several times during spin-dry in my Panasonic NA-148VG4 Washer?
- HHeather TaylorSep 12, 2025
This is normal; the appliance has detected an unbalanced load and is trying to correct it.
To Next PageTo Next PageWhy does the drum stop and rotate several times during spin-dry in my Panasonic NA-148VG4 Washer?
This is normal; the appliance has detected an unbalanced load and is trying to correct it.
Why does water build up during the wash process in my Panasonic NA-148VG4 Washer?
This is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
Why does powdered detergent residue remain after the wash has finished in my Panasonic Washer?
You may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
Why does the displayed remaining time change on my Panasonic NA-148VG4 Washer?
The remaining time is estimated and corrected continually. The remaining time increases if extra rinsing and spinning are required to correct an unbalanced load, which is caused by the laundry shifting to one side of the drum.
Why is no water going into my Panasonic NA-148VG4 Washer?
If your Panasonic Washer isn't getting water, the water tap might be turned off. The water-supply hose may be frozen, or the water supply may be disrupted. Also, the water-supply filter may be clogged.
Why do the buttons on my Panasonic Washer not work?
If the buttons on your Panasonic Washer aren't working, it could be because the programme, temperature, and process settings cannot be changed while washing is in progress (the rinse or spin settings can be changed). The child safety lock may also be activated.
Why does water build up during washing in my Panasonic NA-148VG4?
It's normal for water to build up during the washing process. If the amount of water has decreased, the Panasonic Washer will automatically supply more. For heavy loads, this may happen repeatedly.
Why does the spin process repeatedly start and stop in my Panasonic Washer?
This is normal; intermittent spinning of the tub helps the spin process to operate quietly. The laundry may be too light. If so, add one or two bath towels.
Why does no water flow into the appliance during the rinse process of my Panasonic Washer?
Before rinsing, the appliance spins to drain out remaining water. The water will fill up after that.
What to check if my Panasonic NA-148VG4 is unable to supply water?
Check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water supply filter is clogged. After correcting the problem, open and close the door, and then start the wash again. If the red mark appears in the hose with a water supply valve, the water supply has stopped and you should replace it with a new hose.
General| Water consumption per cycle | - L |
|---|---|
| Energy consumption washing per cycle | 0.66 kWh |
| Annual water consumption washing | 9750 L |
| Annual energy consumption washing | 127 kWh |
| Door color | Black |
| Door hinge | Left |
| Water fill | Cold |
| Drum volume | 70 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 150 ° |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Cycle time (max) | 225 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
| Door opening diameter | 340 mm |
Details on connecting the appliance to mains power and customer support contact.
Comprehensive safety guidelines covering general use, electrical, installation, and operational safety.
Identifies machine parts and outlines essential pre-wash procedures and laundry preparation.
Explains button functions, display indicators, and door unlocking procedures.
Instructions for adding detergents, softeners, and other chemicals to the correct compartments.
Important safety guidelines for using the washing machine, including child safety.
Precautions regarding appliance location, water usage, ignition sources, and flammable materials.
Warnings and instructions related to the mains lead, plug, and electrical connections.
Guidelines to prevent injury during installation, operation, and maintenance of the appliance.
Cautions regarding hose usage, appliance suitability, water supply, and loading.
Safety measures for operating the machine, including door handling and drum contents.
Guide on loading laundry, selecting programmes, adding detergent, and starting the wash.
Details on various wash programmes, their features, and technical specifications.
Guidance on washing delicate items, bedding, and outdoor clothing.
Explains selecting individual processes and combining additional functions for better results.
How to use the preset timer and activate/deactivate the child safety lock feature.
Instructions for cleaning the appliance exterior, drum, and detergent drawer.
Procedures for cleaning the door seal, window, and the crucial drain filter.
Steps for cleaning the water-supply filter and preventing the hose from freezing.
Lists common issues with the washing machine and their potential causes and fixes.
Addresses problems related to rinsing, spinning, and time display during the wash cycle.
Covers problems like power interruptions, circuit breaker trips, and display clarity.
Explains specific error codes displayed by the machine and the corrective actions.
Guidelines for choosing a suitable and safe location for the washing machine and how to carry it.
Detailed steps for connecting the water supply and drain hoses, and the power supply.
A checklist and procedure for testing the appliance after installation.
