To Next PageTo Next PageWhy do foam and water remain in door of Panasonic NA-148VX3WAU Washer?
If foam and water remain in the door or door seal of your Panasonic Washer, although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected.
Why does the drum stop and rotate during spin-dry on Panasonic Washer?
If during spin-dry, the drum stops and rotates several times in your Panasonic Washer, this is normal; the appliance has detected an unbalanced load and is trying to correct it.
Why does rinsing start before spin finishes on Panasonic NA-148VX3WAU Washer?
If rinsing begins before the spin process finishes in your Panasonic Washer, it may be because the appliance detected an unbalanced load, which is caused by the laundry shifting to one side of the drum, so rinsing started automatically to correct the imbalance. After washing, excess foam may remain, so the water is drained out and refilled to wash it away.
Why no water flows into Panasonic NA-148VX3WAU during rinsing?
If no water flows into your Panasonic Washer during the rinsing process, before rinsing, the appliance spins to drain out remaining water. The water will fill up after that.
How to unlock buttons on Panasonic Washer?
If the Panasonic Washer buttons aren't working while washing, remember that programme, temperature, and process settings can't be changed mid-cycle (though rinse or spin settings can be). Also, check if the child safety lock is activated.
Why does water build up during Panasonic NA-148VX3WAU Washer cycle?
If water builds up during the washing cycle of your Panasonic Washer, this is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
Why is there detergent residue in my Panasonic NA-148VX3WAU Washer after washing?
If after the wash has finished, powdered detergent residue remains in your Panasonic Washer, you may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
Why is my Panasonic NA-148VX3WAU Washer making unusual noises?
If there is an unusual noise or vibration coming from your Panasonic Washer, there may be metal items in the drum, the anchor bolts may not have been removed, or the appliance may be on a sloping or unstable surface. If none of these is the cause, contact your local Customer Communication Centre.
Why is fabric softener overflowing in my Panasonic NA-148VX3WAU Washer?
If fabric softener overflows in your Panasonic Washer, the softener may have exceeded the MAX level for the detergent drawer, or you may have spilt the liquid by closing the detergent drawer too strongly.
Why does spin cycle keep stopping and starting on Panasonic NA-148VX3WAU?
If your Panasonic Washer's spin cycle repeatedly starts and stops, it is normal. Intermittent spinning of the tub helps the spin process to operate quietly. The laundry may also be too light, so add one or two bath towels.
General| Capacity | 8 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Color | White |
| Warranty | 2 years |
| Type | Front Load |
| Energy Rating | A+++ |
