Panasonic NA-D106X1 WS3

34 35
When Necessary

Changed settings are stored in memory even after
the power is turned off .
Changing the Settings
Change the settings
for easier use.
Adjusting the
level of spin
noise
6
Select in step
5
.
Adjust the level of spin
noise with
.
Reduces vibration and
noise during spin.
(The spin time may
become longer.)
Facilitates the startup of spin.
(Large vibration and sound)
(Factory default)

Adjustment
condition for
vibration and
noise varies
according to the
type and amount
of clothes, and
also how the
clothes are
distributed.
7
Press
.
Long beep
(× 6)
The setting is
complete.
(The power turns
off .)

To restore
the setting to
the original
condition,
use the same
procedure.
Disabling
ECONAVI
operation
6
Select in step
5
.
Select the setting with
.
Disables ECONAVI operation.
Enables ECONAVI operation.
(Factory default)
Changing the
rinse cycle
for “Cotton”
program
to 1
6
Select in step
5
.
Set the rinse cycle with
.
1 time
2 times (Factory default)

If the cycle is set
to 1, "Auto Tub
Clean" does not
operate.
Preventing
clothes from
sticking
to the drum after the
washing operation has
fi nished
6
Select in step
5
.
Make the setting with
to prevent
sticking.
Disables sticking prevention.
(Factory default)
Enables sticking prevention.

This setting
requires approx.
5 more minutes
of operation
time.
Cancelling the
end buzzer
Factory default: Buzzer
ON
With the power turned off , while
pressing and holding ,
press and hold at
least 3 seconds.
(When a double beep sounds, the
setting is complete.)

To restore the setting to the
original condition, use the same
procedure.
(When a double beep (x 2)
sounds, the setting is complete.)
Disables the
Anti-crease
operation (P.10).
Factory default: ON
With the power turned off , while
pressing and holding ,
press and hold
at least 3 seconds.
(When a double beep sounds, the
setting is complete.)

To restore the setting to the
original condition, use the same
procedure.
(When a double beep (x 2)
sounds, the setting is complete.)

Before setting
1
Turn the
power on.
2
Select “Wash”.
(P.8)
3
Select “Tub Clean”.
4
Press and hold at
least 3 seconds.
A double beep sounds,
and “ ” is displayed
in the display window.
5
Select the item to
set.
Adjusts the
“Level of spin
noise”.
Disables
ECONAVI
operation.
Changes the
rinse cycle
of “Cotton”
program.
Prevents
clothes from
sticking to
the drum.

Numbers such
as “:03” may be
diff erent depending
on the setting
condition.