Panasonic NA-F62B1

14
Maintenance
Lint fi lter / Water supply hose fi lter / Main unit and tub
Lint fi lter
2. Remove the lint from
the fi lter.
• When the fi lter is torn, etc.
Obtain another one from the place of purchase.
• Turn the wash tub if the fi lter cannot be removed easily.
(See page 7 for details.)
3. Put the fi lter back in.
Make sure it clicks into place.
1. Remove the fi lter.
• Be absolutely sure to follow the procedures as
described, otherwise water will spray out.
1. Turn off the water faucet.
2. Press the [POWER ON] button.
3. Press the [START/HOLD] button.
The WATER LEVEL will light up a few seconds later.
4.
Press the [POWER OFF] button to turn off the power.
5. Loosen the nut.
6. Take off the hose.
7. Clean the fi lter.
Water supply hose fi lter
• Upper part of the tub
Wipe with a damp cloth.
 Do not apply water directly.
The fl oor could get wet.
Main unit and tub
• When the fi lter is full.
• When water supply seems constricted.
•
Main unit
Wipe with a soft cloth. Use a neutral dishwashing liquid or
soap for stubborn places.
 Do not apply water directly.
 Do not use cleanser, paint benzine, alcohol, kerosene, etc.
 Follow any instructions that come with a chemically treated
cloth.
Maintenance
TUB DRY
This process is to dry the tub during 30 minutes of spinning operation and prevents fungus
from growing inside.
Remark: Please be informed not to put laundry inside the tub during this program.
1
Press the [POWER ON] button.
2
Press the [PROGRAM] button fi ve times
for [TUB HYGIENE] Course.
• The [TUB HYGIENE] light will be indicated.
3
Press the [PROCESS] button once for
selecting only “SPIN”.
4
Press the [START/HOLD] button.
• Spinning operation will be operated for 30
minutes
The buzzer lets you know when the washing is fi nished.
1
3
2
NA-F62-70B1-ENABPS.indd 14NA-F62-70B1-ENABPS.indd 14 5/8/08 9:16:40 AM5/8/08 9:16:40 AM