- 11 -
NA-F60A6, F70A6, F756A, F70G6, F70G6P, F70X6, F806X
5.2 NA-F70X6 / NA-F806X
SOAK
• Operations course for heavily washed laundry.
• You can choose your soak time from 1, 3, 5
or 8 hours.
• You can adjust soak time based on the
condition of dirt.
OFF/ON
• The power automatically turns off when total
operations is finished.
• The power automatically turns off if [ START/
HOLD ] button is not pressed within 10 min
after turning on the power.
PROCESS
• Press to select WASH only, WASH and
RINSE or other individual functions.
WATER LEVEL
(Water Volume Display)
• The appropriate WATER LEVEL for the size
and type of your alundry will be displayed.
• You can adjust the WATER LEVEL according
to your desired level.
START/HOLD
• Press this to start.
• Press this to stop in the middle of the cycle.
PROGRAM (Course Select)
• According to type of laundry and stain, you can
select suitable course yourself.
TIME DISPLAY
• When the machine is in operation, the time
display shows how much time (in minutes) is
left.
• When the programmable timer has been set,
this display shows how much time is left until
the wash is finished by pressing the
[ RESERVE ] button.
• Timer indication on the panel will show longer
timer than selected time as it includes water
feeding, draining, etc.
RESERVE
• Press the [ RESERVE ] button to set how
many hours later you would like the wash to
be completed.
Fuzzy logic control is used to recommend the proper water level and amount of detergent for the amount of laundry being done.
Caution : If you need to change the [ PROGRAM ] and [ SOAK ] settings after the cycle has already started, turn the power off and on it back.
To Next Page
Loading...
Need help?
General