Panasonic NA-F70G6 - Power, Grounding, and Leveling; Trial Operation

Installation
27
6.
Check that the washing machine is level.
The bubble should be at the centre of the mark.
Leveller
Mark
Bubble
5.
Connect the power plug and grounding wire.
z Plug the power cord into a dedicated household 3-pin AC outlet rated at 10 A,
220 V to 240 V.
If you are not sure, contact a qualied electrician.
7.
Perform a trial operation.
z Check that there is no water leakage, abnormal sounds or error display.
 If the bubble is out of
the mark
3 Turn to the
right to tighten.
1 Turn the adjustable leg knob
to the left to loosen.
2 Turn the adjustable leg
to eliminate wobble.
To lowerTo raise