To Next PageTo Next PageHow to troubleshoot a Panasonic NA-FD12VR1BT Washer that shows no operation?
If your Panasonic Washer isn't starting, make sure of the following: * The lid is securely closed. * The washer is turned on. * The power plug is fully inserted into the outlet. * You've pressed the 'Start' button. * The breaker is on.
Why does my Panasonic NA-FD12VR1BT Washer spin change to rinse?
If your Panasonic Washer spins and then switches to rinse, it's likely because the clothes are unevenly distributed inside the tub. The appliance automatically corrects this imbalance by initiating a rinse process to redistribute the load.
What happens if there is a power failure with my Panasonic Washer?
If the power fails or the breaker trips during a wash cycle, don't worry. The Panasonic Washer is designed to resume the cycle from the point where it stopped once the power is restored.
Why is water supplied while the water level drops in my Panasonic Washer?
If you notice water being added to your Panasonic Washer while the water level is dropping, it's likely due to a large laundry load. The washer automatically adds water to compensate.
General| Capacity | 12 kg |
|---|---|
| ECONAVI | Yes |
| Inverter | Yes |
| Water Bazooka | Yes |
| StainMaster+ | Yes |
| ActiveFoam System | Yes |
| Auto Tub Clean | Yes |
| Soft Closing Lid | Yes |
| Voltage | 220-240 V |
| Motor Type | Inverter |
| Frequency | 50 Hz |
Warnings regarding children's use and touching the tub while in motion.
Guidelines on safe electrical connection and handling of the appliance.
Proper methods for connecting power and grounding the washing machine.
Measures to prevent finger pinching, falling, or touching hot surfaces.
Guidance on avoiding appliance failure by proper placement and item selection.
Precautions against fire hazards from dust and flammable materials.
Instructions to prevent water leaks, especially concerning hose connections.
Advice on avoiding damage by not disassembling or modifying the appliance.
Guidelines for choosing a suitable and safe location for the washing machine.
Advice to seek professional installation for safety and proper setup.
Instructions for securing the bottom cover of the appliance.
Proper method for attaching the drain hose, including length restrictions.
Addressing discrepancies or issues with the remaining time display.
Steps to resolve situations where the appliance does not start or operate.
Solutions for problems preventing changes to wash settings.
Resolving problems with water filling or maintaining the correct level.
Handling power interruptions and ensuring program effectiveness.
Addressing problems related to rinse cycles or spin performance.
Solutions for uneven tub rotation or vibration during operation.
