• Packaging material (e.g. Films, Styrofoam)
can be dangerous for children.
• There is a risk of suffocation ! Keep all
packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the machine and remove the base packaging. Make sure the small triangle foam
(a) is removed with the bottom packaging together. If not, lay the unit down on the
side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
You must remove the transport bolts from the backside before using the product.
1. Loosen the 4
transport bolts with
a spanner.
3. Close the holes
using the cover caps.
2. Remove the bolts
including the rubber
parts and keep them
for future use.
a
Unpacking the Machine
Remove Transport Bolts
10
WARNING
WARNING
To Next Page
Loading...
