07
QUICK START GUIDE
• Before washing, please make sure the machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any
residual water and to neutralize potential odors, it’s recommended to clean your
appliance before first use. For this reason, recommended to clean the inner drum by
running the "Drum Clean" or other program with the optional temperature of 90
degrees. Be careful not to put laundry and detergent in the machine.
Detergent need to be added in compartment I if the pre-wash function is selected.
4. Close door
5. Add detergent
Main
wash
Prewash
Softener
CAUTION
1. Before Washing
NOTE
1. Plug in 2. Open tap 3. Load
Ⅱ
I
To Next Page
Loading...
