To Next PageTo Next PageWhat to do if the door does not open during an operation (Washing or drying) of my Panasonic NA-S106FX1 Washer/Dryer?
If the door of your Panasonic Washer/Dryer won't open during washing or drying, check the water level if the temperature is high. Also, try disabling the Child Lock. You can also try turning off the spin function.
What to do if my Panasonic NA-S106FX1 Washer/Dryer is not reacting during an operation?
If your Panasonic Washer/Dryer isn't responding, here are a few things to check: ensure the Child Lock is off; verify there isn't a power cut; try the Main function; make sure the door is completely closed and the appliance is turned on. If none of these work, try unplugging the appliance and plugging it back in, press the 'Start' button, or check that the breaker is on.
Why does my Panasonic NA-S106FX1 Washer/Dryer make unusual noise or vibration?
An unusual noise or vibration in your Panasonic Washer/Dryer could be due to the appliance being on a slope or unstable surface. Check and adjust the 4 feet of the appliance to ensure it is stable.
Why is the drying taking too long in my Panasonic Washer/Dryer?
If drying is taking too long in your Panasonic Washer/Dryer, ensure there is at least 5 cm of space around the appliance.
Why does the foam vary in my Panasonic NA-S106FX1 Washer/Dryer?
The foam levels in your Panasonic Washer/Dryer might vary due to several reasons. Check the type and amount of powder detergent you're using. It could be due to too little or too much detergent, or the load might be too large or heavily soiled. Consider using a low-foam detergent.
Why is there unevenness during the spin process of my Panasonic NA-S106FX1 Washer/Dryer?
Unevenness during the spin process in your Panasonic Washer/Dryer can be due to a load that is too light. To resolve this, try adding one or two bath towels. You can also try the auto correct function or wipe the appliance after washing.
Why is there noise during water drainage in my Panasonic NA-S106FX1/Dryer?
The noise during water drainage in your Panasonic Washer/Dryer is normal; it indicates that the drain pump is working.
What is the reason for noise from the sound of fan rotating in Panasonic NA-S106FX1/Dryer?
The noise from the fan rotating in your Panasonic Washer/Dryer is normal. The fan cools the electric parts.
General| Washing Capacity | 10 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Energy Rating | 5 Star |
| Weight | 74 kg |
| Display Type | LED |
| Inverter Technology | Yes |
| Loading Type | Front Load |
| Wash Programs | 16 |
Identifies the main components of the washing machine for user reference.
Lists and illustrates the accessories included with the washing machine.
Instructions on preparing clothes, including removing objects and using nets.
Guidance on sorting clothes, reversing items, and pretreating stains.
Explains the various indicators and readouts on the washing machine's display panel.
Details specific features or controls related to the NA-S86FG1 model.
Details specific features or controls related to the NA-S106FX1 model.
Explains the operation of the touch-sensitive buttons and their functions.
Lists and describes programs for washing and combined wash/dry cycles.
Details various wash-only programs for different fabric types and soil levels.
Outlines the programs available for drying clothes, including timed and auto modes.
Provides detailed settings for combined Wash & Dry programs.
Provides detailed settings for Wash only programs.
Provides detailed settings for Dry only programs.
Shows the available spin speed ranges and optional function compatibility for programs.
Details the availability of optional functions like Timer, Rinse+, etc.
Tips for washing and drying bedding items like sheets and blankets.
Guidance on washing delicate fabrics, including using Rinse+ and appropriate detergents.
Describes the available dry modes: Auto, Low, and Timed dry.
Explains how to select dry modes and understand the corresponding indicators.
Instructions on how to change the washing temperature settings.
Provides a guide for selecting temperature based on fabric type and soil level.
Explains how to adjust the spin speed for different washing needs.
Details the ECONAVI feature, its sensors, and lamp indications.
Instructions on selecting combinations of wash, rinse, spin, and dry processes.
Instructions on how to set the timer for delayed operation of the appliance.
Explanation of the Rinse+ function for an extra rinse cycle.
Details the Easy Iron function to reduce wrinkles and make ironing easier.
Instructions for performing the automatic tub cleaning process.
Details the Blue Ag+ bacteria elimination function.
Explains the lifespan and replacement of the Ag+ case.
Step-by-step guide to enable and disable the child lock feature.
Instructions on how to cancel or reset the appliance's buzzer sounds.
Procedure for cleaning the water supply filter if water flow is restricted.
Guidance on cleaning the door seal to prevent issues.
Instructions for removing and cleaning the detergent drawer.
Steps for replacing the Ag+ case when its contents are depleted.
Instructions for running the Tub Clean and Dry Filter Clean programs.
Addresses common issues and checks for the main unit of the washing machine.
Covers problems related to unresponsive controls and the machine not starting.
Explains the possible cause of rubber odour and suggests the Tub Clean program.
Provides steps to resolve the issue when the washing machine door cannot be opened.
Addresses issues concerning insufficient or excessive foam during washing.
Explains reasons for foam variation, including temperature, water level, and detergent type.
Covers problems occurring during the wash cycle, like excess foam or water drainage.
Addresses issues related to the drying process, such as long drying times.
Discusses problems during the spin process, like unevenness or foam.
Addresses issues like laundry becoming yellow after washing.
Explains variations in displayed time, corrected time, and remaining time.
Discusses normal operational noises like drain pump and fan rotation.
Addresses unusual noise or vibration issues and their causes.
Covers issues like power cuts and how the machine recovers operation.
Explains error codes related to drying (U04) and drainage (U11, U15).
Details error codes for door (U12), spin (U13), and water supply (U14) issues.
Explains the U17 error code for spin failure and next steps.
Provides information on the "Hot" display indicating the door is locked due to high temperature.
Provides the physical dimensions of the washing machine for installation planning.
Highlights important location checks to avoid damage or malfunction.
Details the clearances required for built-in installation of the appliance.
Instructions on how to safely carry and move the washing machine.
Steps for installing the bottom cover of the appliance.
Procedure for removing the anchor bolts after installation.
Guidance on how to level the washing machine using adjustable feet.
Specifies maximum lengths and distances for hose and power cord connections.
Illustrates the hose and power cord connections for the right side setup.
Illustrates the hose and power cord connections for the left side setup.
Detailed instructions for connecting the water supply hose securely.
Instructions for connecting the drain hose to sinks, stand pipes, or drain holes.
Covers checks for water leaks, abnormal sounds, and error displays after the test run.
Focuses on identifying and resolving water leaks and abnormal sounds.
Guides on checking error codes displayed after the test run.
Electrical specifications including voltage and frequency ratings.
Details the maximum power consumption for washing and drying modes.
Provides the physical dimensions of the product for installation reference.
Specifies the maximum load capacity for wash and dry cycles.
