27
Optional Functions
Setting the Child Lock
Child Lock
You can lock the door to prevent
children from opening it themselves.
This also locks the control buttons.
1
Turn on the power.
For NA-S106X1
2
Press for at least
5 seconds.
(
lights up.)
To deactivate
Press for at least
5 seconds.
( disappears.)
zIgnore the beeps and keep
pressing until the Child Lock is
deactivated.
For NA-S106G1
2
Press for at least
5 seconds.
( lights up.)
To deactivate
Press for at least
5 seconds.
( disappears.)
Cancelling the buzzer
You can turn off the buzzer that
sounds at the end of the programme.
1
Turn on the power.
2
Press for at least
5 seconds.
The buzzer setting is cancelled
after a beep.
To activate
Do the same operation as you did
for cancelling. The buzzer setting is
activated after two beeps.
Cancelling the “Active
Foam” function
You can disable the “Active foam”
function.
1
Turn on the power.
2
Select “Tub Clean”.
3
Press for at least
3 seconds.
(“002” is displayed and
lights up.)
4
Press.
(“002” is still on and
disappears.)
5
Press.
(The setting is complete
and the power turns off)
To activate
Do the same operation as you did
for cancelling.
lights up in step 4.
Changing Appliance Settings
NA-S106X1_EN_MY_VI.indb 27 2017-11-20 17:40:09
To Next Page
Loading...
