9
How to Remove the Lid
Overheating Protection
To close
Press down until hearing “click” sound.
To attach
Insert the lid slantwise.
How to cancel the display
Supply water into the container,
and press key.
Notice
Lid opening lever
Lid release
lever
Flashing alternately
If an empty inner container is heated, the overheat safety function (which prevents an empty
inner container from being heated) will be activated. The power will be shut off automatically
to prevent the problems that may occur due to overheating. This will be shown on the display
as shown below.
If an empty inner container is heated, an odor will be emitted and the container
may be discolored.
Causing
●
Less than the minimum water level in the inner
container was boiled.
●
After water is added, the lid might be left open.
Press and lift the lid opening
lever to open the lid.
Pull it up slantwise while pressing
the lid release lever.
Part Names and Handling Instructions
01_NC-EG4000_3000_2200_PZ05H6934_EN.indd 901_NC-EG4000_3000_2200_PZ05H6934_EN.indd 9 6/4/2566 BE 14:216/4/2566 BE 14:21
To Next Page
Loading...
Need help?
General
