(7)
(1)
(2) (3) (4) (5)(6) (8) (9)
(11)
(10)
(13)
(12)
Digital Display Window (see below)(1)
Program pad(2)
Shift (A/B/C) pad(3)
Power Level Selector pad(4)
Double Quantity pad(5)
Triple Quantity pad(6)
• Number/Memory pads (7)
• Time input
Stop/Reset pad(8)
Start pad(9)
Door Handle(10)
Air Filter(11)
SD Memory Card Cover*(12)
Splatter Shield (top of inner cavity)(13)
A – Program Display
B – Heating Time Display (“min. sec.” or “hour min.”)
C – • Memory pad Number Display
• Heating Stage Indicator
D – Pattern of buzzer sound settings
E – •
Calling Programmed Heating: Stage Number Indicator
•
Programmed Heating in Progress: Operation Indicator
• Beep tone settings: Scale Indicator
This oven is preset at the factory as follows:
Number/Memory pads preset HIGH power at the indicated heating times for single stage heating (See pages 9-12) X
1 = 10 sec. 2 = 20 sec. 3 = 30 sec. 4 = 40 sec. 5 = 50 sec.
6 = 1 min. 7 = 1 min. 15 sec. 8 = 1 min. 30 sec. 9 = 1 min. 45 sec. 0 = 2 min.
• Model No. NE-1772:
Memory numbers are displayed using 1 digit for 1 to 9, 2 digits for 10 to 99, and 3 digits for
000 to 999. Additionally,
there are three sides, A (00 to 99), B (00 to 99) and C (00 to 99).
• Other models: There are three sides, A, B and C. Only A-side is preset.
Program Unlocked (See pages 13-14) X
Double Quantity = 1.6 Triple Quantity = 2.2 (See page 13) X
Oven Lamp When the door is open = ON Blinking at the end of heating cycle = OFF X
Decrease brightness during cooking = OFF (See pages 18-19)
The default filter cleaning time is set to “0”. X
If you wish to change these settings, please consult the operating instructions for programming procedure.
(See page 17)
* In this manual, illustrations of Model No. NE-1772 is used for explanation purposes.
Model numbers other than NE-1772 do not have SD Memory Card functions.
Outline Diagram
To Next Page
Loading...
