Why is my Panasonic Iron not producing steam?
If your Panasonic Iron is not producing steam, try the following: * Fill the Water Tank with tap water up to the 'MAX' dot. * Ensure the Steam/Dry Selector is set to the Steam position, or the Power Switch is set to ' '. * If the steam is poor, move the Steam/Dry Selector several times, then reset it to the Steam position.
What to do if my Panasonic Iron has no spray?
If your Panasonic Iron isn't spraying, try these steps: 1. Push the Spray Mist Trigger several times. 2. Ensure the Water Tank is filled with tap water up to the 'MAX' dot.
Why are my clothes marked after ironing with my Panasonic Iron?
If your clothes are marked after ironing with your Panasonic Iron, empty the Water Tank and refill it with clean water. This will remove any potential contaminants that may be in the iron or cup.
General| Type | Steam Iron |
|---|---|
| Power | 2400 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Water Tank Capacity | 300 ml |
| Soleplate Material | Ceramic |
| Steam Output | 50 g/min |
| Steam Boost | 200 g/min |
| Vertical Steaming | Yes |
| Auto Shut-off | Yes |
| Anti-Drip System | Yes |
| Anti-Calc System | Yes |
| Cord Length | 2.5 m |
| Self-cleaning | Yes |
To Next Page