17
English
Trouble shooting
Problem Causes, Solution
No heating
Make sure the Power Plug is plugged into a
household socket.
No steam
Poor steaming power
Fill the Water Tank with tap water up to “MAX” dot.
If there is no steam, set the Steam/Dry
Selector to the Steam position, or set the
Power Switch to “
”.
For poor steam, move the Steam/Dry Selector
several times, then reset to the Steam position.
Press the Power Shot Button several times
when the “Power Shot” appears insufficient.
Wait until the Thermostat Operating Indicator
Light switches out before using the iron.
Set the Power Switch to “ ”.
No spray
Push the Spray Mist Trigger several times.
Fill the Water Tank with tap water up to “MAX” dot.
Water leaks from steam
vents
Press the Power Shot Button in intervals of at
least 5 seconds when using the “Power Shot”.
Wait until the Thermostat Operating Indicator
Light switches out before using the iron.
Clothes are marked
Empty the Water Tank and fill it with clean
water. There may be contaminants in the
iron/cup.
Specifications
Model No. NI-WT980 NI-WT960
Power Source
220-240 V 50-60 Hz
Power Consumption
Weight (approx.) 1.8 kg
Dimension (approx.) 307 mm x 141 mm x 153 mm
This iron is intended for household use only.
2 400-2 800 W 2 200-2 600 W2 000-2 400 W
( For Australia/New Zealand only: 2 000-2 400 W )
To Previous Page
Loading...
