13
English
4
4
Set the Power Switch to “ ”.
The Thermostat Operating Indicator Light switches on.
•
If the temperature of the Soleplate is high, the
Thermostat Operating Indicator Light will not turn on.
5
5
Use iron after preheating the iron until the Thermostat
Operating Indicator Light switches out, which usually
takes about 1 minute.
How to care for and store your iron
3-way cleaning
►METHOD(1) Using the Self-Cleaning feature
1.
2. Set the Power Switch to “ ”.
3. Put the Power Plug into a household socket.
4. Set the Power Switch to the “ ”.
5. After the Thermostat Operating Indicator Light has
gone out, set the Power Switch to “ ” and unplug.
6. Hold the iron horizontally over the sink, press
and hold the Self-Cleaning Button and gently shake
the iron back and forth. Impurities and scale (if
any), together with steam and boiling water will be
flushed out.
Then, turn to METHOD(2).
Fill the Water Tank with tap water as described in “How to fill the Water
Tank”.
To Next Page
Loading...
