Panasonic NI-WT980

14
English
How to use as a dry iron
1
1
Set the Steam/Dry Selector to the Dry
position.
2
2
Position the iron Heel rest position, set the
Power Switch to “ ”.
3
3
Plug the Power Plug into a household outlet.
4
4
Set the Power Switch to “ ”.
The Thermostat Operating Indicator Light goes on.
• If the temperature of the Soleplate is high, the
Thermostat Operating Indicator Light will not go on.
5
5
How to care for and store your iron
3-way cleaning
►METHOD (1) Using the Self-Cleaning feature
1. Fill the Water Tank with tap water as described in “How to fill with the Water
Tank”.
2. Set the Power Switch to “
”.
3. Plug the Power Plug into a household outlet.
4. Set the Power Switch to the “
”.
5. After the Thermostat Operating Indicator Light has
gone out, set the Power Switch to “ ” and unplug
Use iron after preheating it until the Thermostat Operating
Indicator Light goes out, which usually takes about
1 minute.
the Power Plug.