Trouble shooting
Problem Causes, Solution
No heating
Make sure the Power Plug is plugged into a
household outlet.
No steam
Poor steaming power
Fill the Water Tank with tap water up to “MAX” dot.
If there is no steam, set the Steam/Dry
Selector to the Steam position, or set the
Power Switch to “ ”.
For poor steam, move the Steam/Dry Selector
several times, then reset to the Steam position.
Press the Power Shot Button several times
when the “Power Shot” appears insufficient.
Wait until the Thermostat Operating Indicator
Light goes off before using the iron.
Set the Power Switch to “ ”.
No spray
Push the Spray Mist Trigger several times.
Fill the Water Tank with tap water up to “MAX” dot.
Water leaks from steam
vents
Press the Power Shot Button in intervals of at
least 2 seconds when using the “Power Shot”.
Wait until the Thermostat Operating Indicator
Light goes off before using the iron.
Clothes are marked
Empty the Water Tank and fill it with clean
water. There may be contaminants in the
iron/cup.
19
English
Specifications
Model No. NI-WT980
Power Source
120 V
60 Hz
Power Consumption 1700 W 14.2 A
Weight (approx.) 1.8 kg (4.0 lb)
Dimensions (approx.)
This iron is intended for household use only.
307 mm x 141 mm x153 mm
(12.1 in. x 5.6 in. x 6.0 in.)
To Next Page
Loading...
