Panasonic NN-CD767 - Memory

23
• Press Memory Pad.
This feature allows you to pre-program your oven for regular reheating or cooking tasks. You are able to pre-program your oven
for a specific power level and time that is convenient for you. You are able to pre-program three memory tasks.
• The oven is automatically
pre-set to memory 1. To
select memory 2 or 3, turn
Auto Menu Selector Dial
clockwise.
Program the desired
cooking program.
• Press Memory Pad to store
this task or press Start Pad
to start cooking in this
sequence.
• Press Memory Pad.
• The oven is automatically
pre-set to memory 1. To
select memory 2 or 3, turn
Auto Menu Selector Dial
clockwise.
• Press Start Pad to begin
cooking.
NOTE:
1. Auto programs cannot be programmed into memory.
2. Convection pre-heat mode cannot be programmed into memory.
3. Memory can only store 1 stage cooking. It is not possible to store 2 or 3 stage cooking.
4. Setting a new cooking program into memory will cancel the cooking program previously stored.
5. Memory program will be cancelled if the power supply is off or the plug gets disconnected.
M
Memory
M
Memory
M
Memory
Auto Menu/
Temperature
Auto Menu/
Temperature
Auto Menu/
Temperature
Auto Menu/
Temperature
StartStart
Memory
To set a Memory Program
To use a Memory Program