Panasonic NN-CF760M - Using the Delay;Stand Feature; To Set a Standing Time; To Set a Delay Start

Memory
•
Press Memory Pad. The oven is
automatically pre-set to memory
1. To select memory 2 press
memory pad twice. To select
memory 3 press memory pad
three times.
This feature allows you to pre-program your oven for regular reheating or cooking
tasks. You are able to pre-program your oven for a specific power level and time that
is convenient for you. You are able to pre-program three memory tasks.
To set a Memory Program
Program the desired
cooking program.
•
Press Memory Pad to
store this task or press
Start Pad to start
cooking in this
sequence.
To use a Memory Program
•
Press Memory Pad. The
oven is automatically
pre-set to memory 1.
To select memory 2
press memory pad
twice. To select
memory 3 press
memory pad three
times.
•
Press Start Pad to
begin cooking.
NOTE:
1. Auto programs cannot be programmed into memory.
2. Convection pre-heat mode cannot be programmed into memory.
3. Memory can only store 1 stage cooking. It is not possible to store 2 or 3 stage
cooking.
4. Setting a new cooking program into memory will cancel the cooking program
previously stored.
5. Memory program will be cancelled if the power supply is off or the plug gets
disconnected.
En-32