56 EN
Remove the water tank and clean the
compartment where the water tank is
inserted.
Open the water supply cap, remove the
lid and pipe cap and clean.
Pipe cap
Ensure it faces downwards
If the pipe cap is difcult to remove, wiggle from side to side.
When re-tting, make sure that the pipe faces down (see diagram).
The rubber seal of the tank can also be removed for cleaning.
Ensure that the rubber seal is not
inside out when re-tting. If the seal is
not tted correctly the lid will not close
securely and it will leak.
Inside
(at)
Outside
(protruding side)
Removing the Rubber Seal
Cleaning the Water Tank
Clean with a soft sponge in water.
Note
1. Clean the water tank at least once a week to prevent build up of limescale.
2. Do not use a dishwasher to clean the water tank or parts of the water
tank.
To Next Page
Loading...
