Panasonic NN-GT45KW - Auto Sensor Programs

29 EN
English
Auto Sensor Programs
A variety of food may be cooked without having to enter the cooking time,
weight or the power level.
Select the desired
Auto Sensor Program.
More/Less Weight control:
Preferences for degree of cooking vary for each individual. After having used Auto
Sensor programs a few times, you may decide you would prefer your food cooked
to a different degree of cooking. By using More/Less Weight control, the programs
can be adjusted to cook food for a longer or shorter time. Press More/Less Weight
pad before pressing Start. If you are satised with the result of the Auto Sensor
programs, you do not have to use this control.
e.g.
Press Start pad
Notes
1. The oven automatically calculates the cooking time or the remaining
cooking time.
2. The door should not be opened before the time appears in the display
window.
3. The temperature for frozen food is assumed to be -18 °C to -20 °C, for
other types of food +5 °C to +8 °C (refrigerator temperature).
4. To prevent any mistakes during Auto Sensor programs ensure that glass
tray and the plate are dry.
5. The room temperature should not be more than 35 °C and not less than
0 °C.
6. Only cook foods within the recommended weight range described on
pages 30-31.
7. For Auto Sensor programs, fresh vegetables, frozen vegetables, fresh
sh, frozen sh cover with cling lm. Pierce the cling lm with a sharp
knife once in the centre and four times around the edge. For programs
chilled meal and frozen meal reheat in container as purchased. Pierce
covering lm. If transfering meals into a dish, cover with pierced cling
lm. For Auto Sensor programs rice and pasta cover with a lid.
8. For foods covered with cling lm, pierce the lm with a sharp knife,
once in the centre and four times around the edge. If the cling lm is not
pierced, steam can not escape and this could result in over cooking.
9. If the oven has previously been used and it is too hot to be used on an
Auto Sensor Program, ‘
’ will appear in the display window. After the
‘
’ disappears, the Auto Sensor Programs may be used. If in a hurry,
cook food manually by selecting the correct cooking mode and cooking
time yourself.