To Next PageTo Next PageWhat to do if my Panasonic Microwave Oven does not work?
If your Panasonic Microwave Oven isn't working, first ensure it's plugged in securely. Avoid overloading the outlet by using multiple appliances at once. Also, make sure the AC input voltage is adequate. If the food temperature seems too low, it may simply need a longer cooking time.
What to do if my Panasonic NN-ST342M display works but it won't start?
If the display of your Panasonic Microwave Oven shows all figures set, but the oven doesn't start cooking when the program times are set and the START pad is touched, the secondary switch, the P.C.B assembly, the fan motor, or the oven lamp could be defective and need replacement.
Why my Panasonic Microwave Oven won't turn on?
If your Panasonic Microwave Oven does not operate at all and the display window shows no figures, and no input is accepted, the monitor switch may be malfunctioning, or there may be a shorted contact at the primary switch. In this case, replace primary and monitor switches. Also, the high voltage capacitor or the high voltage transformer could be defective and need replacement.
Why my Panasonic NN-ST342M does not work?
If your Panasonic Microwave Oven isn't working, it might be due to overloading the outlet by using too many appliances at once. To resolve this, avoid using other electrical appliances while the microwave is in operation. Also, ensure the microwave plug is securely inserted into the outlet. Low AC input voltage can also cause this issue, so ensure you are using the microwave at an adequate line voltage. If the food temperature is too low, it may simply require a longer cooking time.
What to do if Panasonic NN-ST342M is sparking?
Sparks inside your Panasonic Microwave Oven are often caused by using metallic ware or allowing it to touch the oven wall. Avoid using metallic ware for cooking, unless specifically noted in the cooking guide. Another cause could be ceramic ware trimmed with gold or silver powder. Do not use any cookware with metallic trimming.
How to fix uneven cooking in Panasonic NN-ST342M?
If your Panasonic Microwave Oven isn't cooking food evenly, it could be due to inconsistent microwave intensity. Try distributing the food more evenly, cooking smaller portions, and using lighter weight cookware.
What to do if Panasonic Microwave Oven display works but doesn't start?
If the display of your Panasonic Microwave Oven shows all figures set, but the oven does not start cooking when the START pad is touched, and the setting time does not count down, the secondary switch may need to be replaced. Also, if the fan motor or oven lamp do not turn on, the fan motor should be replaced.
Why is my Panasonic Microwave Oven sparking?
If you observe sparks inside your Panasonic Microwave Oven, it's likely due to using metallic ware or ceramic ware with metallic trimming. Avoid using metallic cookware unless specifically allowed in the cooking guide, and do not use cookware with gold or silver trim.
Why is the output power low on my Panasonic NN-ST342M Microwave Oven?
If your Panasonic Microwave Oven seems to be operating but the output power is low, the cause may be a decrease in power source voltage. It is suggested that you contact your local electric power utility company or a qualified electrician. Alternatively, the P.C.B assembly or the magnetron might be defective and need replacement.
What causes no microwave oscillation in Panasonic NN-ST342M?
If your Panasonic Microwave Oven lamp and fan motor are running, but there's no microwave oscillation (and the display operates properly), the P.C.B assembly, high voltage capacitor, high voltage transformer, high voltage diode, or magnetron could be defective and need replacement.
General| Type | Solo |
|---|---|
| Power Output | 800 W |
| Turntable | Yes |
| Number of Power Levels | 5 |
| Sensor Cooking | No |
| Color | Silver |
| Cooking Modes | Reheat |
