To Cook Using the Quick 30 Function
1. Press Quick 30 to set the desired
cooking time (up to 5 minutes).
Each press is 30 seconds.
Time appears in the display. Power
level is pre-set at 1000 W.
This function allows you to quickly set cooking time in 30 second increments.
Note
1. This function is only available for Microwave. Select desired micro power level before
pressing Quick 30.
2. After setting the time by Quick 30, you cannot use the Time pads.
This feature allows you to add cooking time at the end of previous cooking.
Note
1. This function is only available for Microwave and Timer function and it is not available for
Turbo Defrost and Auto Cook.
2. The Add Time function will not operate after 1 minute cooking.
3. The Add Time function can be used after the 3-stage cooking.
4. The power level is the same as the last stage.
3. Press Start.
Time will be added.
The time in the display
window will count down.
2. Add cooking time by pressing the
Time pads.
Maximum cooking time:
Microwave: 1000 W up to 30 minutes;
other powers up to 99 minutes and
50 seconds.
Using the Add Time Function
2. Press Start.
The cooking will start and the time
in the display will count down.
At the end of cooking, five beeps
will sound.
1. After cooking, press 'Add
Time' pad.
To Next Page
Loading...
