19
7.2. Demo Mode
This mode will be use for only sales points by salesman to show functions & modes to customer without operating components as a
compressor, fan, motor..Etc
7.2.1. Entering Demo mode:
Demo mode can only be activated within one minute of switching on/plugging in the product.
Then appliance will go on [demo function] and the [d] will light during the mode.
All functions can be adjusted to show customer how they are adjusted.
To show alarm function, these will be used:
1st pushing to Alarm Button: Alarm + SR lights
2nd pushing to Alarm Button: Alarm + LV lights
3rd pushing to Alarm Button: Nothing lights
7.2.2. Canceling Demo mode:
For cancelling; Same operation will be used. If user will push Bottle & (left) button at the same time, demo function will be can-
celled.
When appliance is Demo mode; if plug is removed or there is an electricity breakdown; demo mode will not continue when user plug
into or electricity breakdown finish.
• user will press Bottle & (left) button at the same time
OR
• user will press (right) button and door open close 3 times while pushing
To Next Page
Loading...
