Panasonic NR-B32SX1 - Exiting Service Mode

21
4. Push
Displaying actual temperatures in compartments
(SC) and its bars (only the lowest bar on the right side) will blink during this mode.
Freezer and fridge bars will be ON according to freezer sensor values' specification.
Specification is given below.
If service man pushes (left) button;
Freezer and fridge bars will be ON according to cooler sensor values’ specification.
Cooler icon blinks. Specification is given below.
If service man pushes (left) button again;
Freezer and fridge bars will be ON according to defrost sensor values’ specification.
No icon blinks. Specification is given below.
Specification for above functions:
If sensor temp < -40C , -24 bar should be ON,
If -40C  sensor temp. < -30C , -22 bar should be ON,
If -30C  sensor temp. < -20C , -20 bar should be ON,
If -20C  sensor temp. < -10C , -18 bar should be ON,
If -10C  sensor temp. < 0C , -16 bar should be ON,
If 0C  sensor temp. < +10C , +2 bar should be ON,
If +10C  sensor temp. < +20C , +4 bar should be ON,
If +20C  sensor temp. < +30C , +5 bar should be ON,
If +30C  sensor temp. < +40C , +6 bar should be ON,
If sensor temp  +40C , +8 bar should be ON,
If service man does not push (left) button in 5 min, mode will be canceled.
Appliance will return to initial service mode reaction
If service man pushes (right) button again, function will be canceled.
Appliance will return to initial service mode reaction
8.2. Exiting service mode:
At initial service mode reaction push (left) button continuously. During this time, open and close fridge door for 3 times.