23
Cooling error on display
To prevent the wrong alarms, this alarm status is disabled on following conditions:
• During the first 6 hours after the product was firstly connected.
• During the defrost period
• During the first two hours after a defrost
• During the first 2 hours after refrigerator door open/close.
ERROR DETAILS USER MODE REACTION SERVICE MODE REACTION
F sensor > -10C Freezer compartment is not cool
enough
SR icon blinks
Buzzer sounds
If user pushes ALARM button, buzzer
is closed
But SR & ALARM blinks until defect is
disappears.
Display +6 bar ON
R sensor > +15C and if
Holiday mode is not active
Refrigerator compartment is warm Display +8 bar ON
R sensor < -5C Refrigerator compartment is too
cool
Display -24 bar ON
To Next Page
Loading...
