English
9
Operation
●
Normally, the indicators are off to save electricity.
• All indicators turn on when the power is turned on, and then turn off after approximately 5 seconds.
• During Auto ice making off, quick freezing or ECO NAVI operation, the corresponding lamp is on to notify you that
the operation is being performed.
■ Adjust the temperature
●The set temperature range of the refrigerator compartment is 7 °C ~ 2 °C, and the set temperature
range of the freezer compartment is -17 °C ~ -23 °C.
●If you want to change the refrigeration state, you can adjust the temperature.
If there is no button operation in the unlocked state, the control panel will automatically lock
after 10 seconds.
●
Settings can only be changed when the refrigerator compartment doors are closed.
●
If
“
CL
”
is displayed on the notice indicator
area when a button is pressed, the operation lock is set. (P. 20)
●
Do not subject the control panel to a strong impact, or hit it with a hard object.
(The surface may be cracked or scratched.)
●
For explanation purposes, all the indicators
are turned on.
ECO NAVI lamp
(Green
）
Turns on during ECO NAVI operation
(P. 27)
• If the temperature control of the freezer
compartment or refrigerator compartment is set
to other than “ 2 ”, ECO NAVI does not operate.
Detects the brightness within the refrigerator
range, and performs ECO NAVI operation.
•
Occurrence of abnormality, demo mode (P. 17)
•
Operation lock
「
CL
」
(P. 20)
Always on during QUICK FREEZING (P. 11)
Always on during AUTO ICE OFF (P. 13)
•
You can turn off the "AUTO ICE OFF"
if you will be bothered by the display. (P. 20)
Turns on when each temperature control is set
【
Settings at time of purchase
】
Light intensity sensor
Notice indicator
Quick freezing
Auto ice making off
Displays the temperature
settings of the freezer
compartment and the
refrigerator compartment
Selection UP button
(moves selection up)
Menu/Enter button
Selection DOWN button
(moves selection down)
Freezer compartment
Refrigerator compartment
2
2
Procedure Display
Notices
Change the item to the desired setting.
How to view and operate the Control panel
Select"FRIDGE" or"FREEZER"
① Press
and hold for more than 3seconds,
the control panel isunlocked.
② Press
to make the compartment to be set
flash
③ Press to set the setting value to be changed.
SELECT
ROOM
Enfocus Software - Customer Support
[FREEZER][FRIDGE]
To Next Page
Loading...
