EasyManua.ls Logo

Panasonic NR-CW530H - Water Connection System Installation

Panasonic NR-CW530H
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation of Water Connection System (For Auto Ice and Water Dispenser models only)
List of Water Connection System accessories
1
2
3
4
5
6
7
1 1 x Joint Water Supply
2 Dual Check Valve Assembly Block
3 1 x Water Filter Cartridge & Filter Head
4 1 x Joint Tube
5 4 x Joint Clips (1/4”)
6 1 x Sub Filter Bracket
7 2 x Truss M4x35 (for xing Sub Filter Bracket)
Dual Check Valve must be installed to prevent backflow.
The new tubing supplied with the refrigerator is to be used, old tubing from old
water and ice connections should not be used.
Ensure the Tube Inlet is correctly connected to the Dual Check Valve.
A licensed plumber installs a new water supply outlet nearer to the appliance
should the tubing supplied not be long enough.
It is not recommended that the tubing be extended as this could adversely
a󰀨ect the flow of water to the ice maker or Water Dispenser.
An isolator ball valve be installed by a licenced plumber for water pressure
adjustment and water supply shut o󰀨 to the refrigerator.
A noise reduction valve also be tted in the water supply line. This will reduce
water hammer and its e󰀨ects from quick action household taps and fast acting
valves on appliances.
Panasonic does not accept for damage, including water damage caused by
faulty installation or plumbing.
10

Related product manuals