LED lamp and grounding
● The refrigerator LED lamp, specially designed for this refrigerator, do not replace it by
yourself. If you need replacement, please contact Panasonic Service Center.
● If the refrigerator plug has no ground wire, it should be connected with a grounding
connection to prevent electrical hazard from electric leakage.
Moving or shifting
1 Remove ice in the Ice trays and Ice box
2 Unplug the refrigerator.
3 Adjust the adjuster bolts (left and right) so that they do not
touch the floor.
4 Place a container underneath the drainage hole, then
slowly tilt the refrigerator backward to drain water from the
drainage hole.
This action requires 4 or more people, of which 2 people lift
the front of the refrigerator to prevent the refrigerator from
sliding and avoid the risk of accidents.
Drainage hole
※ How to move and transport
● At least 4 people are required to transport the
refrigerator.
● Each person lifts a corner of the refrigerator.
● Do not transport by holding the refrigerator doors.
Caution
● When transporting, use straps to secure the refrigerator
doors and avoid letting the doors open by itself.
● Do not place the refrigerator on its side when
transporting, as this may cause damage to the
refrigerator.
● After installation, wait at least 4 hours before plugging
in the power to ensure that the gas and oil in the
compressor are in a stable state.
Use straps to
secure
9
To Next Page
Loading...
