※ Water Connection System installation instructions
Step 1: Ensure the refrigerator is NOT plugged into a power supply.
Step 2: Locate a cold water supply that is suitable for water connection.
Step 3: Connect 200 mm (7.87”) Tube Filter Inlet (white tube ¼”) of 2 Dual Check Valve
Assembly Block with 3 Water Filter Cartridge & Filter Head
as instructed in
Figure 1.
Figure 1: Connect 200 mm Tube Filter Inlet of Dual Check Valve Assembly Block with
Water Filter Cartridge & Filter Head
Water Filter Cadtridge &
Filter Head.
200 mm blue
Tube Filter Inlet
Notice the way of the arrow in Water Filter.
This arrow way is water supply flowing way.
1 x Joint Clip
12
To Next Page
Loading...
