Step 9: Determine the mounting position for the Water Filter and x the
Sub Filter Bracket 6 with 02 pcs of Truss M4x35 7 to a xed surface.
The direction to x Sub Filter Bracket is referred to in Figure 5.
Ensure the Water Filter is in a convenient location to access easily every 6 months
for replacement.
Ensure the clearance from the bottom of Water Filter is at least 50 mm to perform
lter removal (Figure 6).
Insert Water Filter to Sub Filter Bracket by inserting the Filter Head of Water Filter
to hooks of Bracket until get the “Click” sound when Water Filter and Sub Filter
Bracket are locked into place.
Move Water Filter down about 90° until get the “Click” sound when Water Filter is
rmly locked into.
We recommend tting the Water Filter in a vertical orientation with the Filter Head
at the top as in Figure 6.
This will ensure the performance of Water Filter and minimise water leakage
during replacement of the lter.
Figure 5: Sub Filter Bracket and Water
Filter xing direction.
Figure 6: Water Filter usage setting.
Filter Head
Sub Filter Bracket
2 x Truss M4x35
Fixed Surface
Fixed Surface
At least 50 mm
Water Filter
16
To Next Page
Loading...
