- 25 -
1
How to level by using adjustable legs ?
2
How to level by using the appropriate-
thickness plates?
1
1
Turn the adjustable legs of left/right sides, set them
afloat from the floor surface.
2
Look and check at which (left or right) side the corner
caster (rear wheel) is floating ※1
3
Pull the refrigerator forward.
4
At the caster-floating side, place the plates to proper
height for filling the gap between the floating caster
and fl oor surface.
1
Turn adjustable legs of left/right sides, lower
them until they reach the floor surface to be fixed.
2
1 Move the refrigerator body to put the caster on the
plates properly.
2 Re-adjust the front adjustment legs for balance and
levelness between left side and right side.
※ If it is difficult to see caster floating gap, please use the
following reference to set up plate-sets.
(1) In case of double-door type.
(In case the right-hand door is hanging down.)
Place the plates at the left corner.
(In case the left-hand door is hanging down.)
Place the plates at the right corner.
2
If a door is hanging down, adjust by turning adjustable
legs to level it.
(1)
In case of double-door type.
(In case the right-hand door is hanging down.)
The right side will rise up, if lowering the rightadjustable leg.
(In case the left-hand door is hanging down.)
The left side will rise up, if lowering the left adjustable leg.
w
For some models, a specialized tool to turn the adjustable
legs is included in same package as the front grille.
(2) In case of right-hand door (or left-hand door) type.
(In case the right-hand door is hanging down.)
Place the plates at the left corner.
(In case the left-hand door is hanging down.)
Place the plates at the right corner.
(2)
In case of right-hand door (or left-hand door) type.
(In case the right-hand door is hanging down.)
The right side will rise up, If lowering the right adjustable leg.
(In case the left-hand door is hanging down.)
The left side will rise up, If lowering the left adjustable leg.
Please place the appropriate-thickness
plate to proper height for filling the gap
between the corner caster
(rear wheel) and floor surface.
wall
surface
appropriate-thickness
plates
rear
wheel
flooring
materials
hanging-down door
hanging-down door
hanging-down door
left corner
left corner
right corner
right corner
refrigerated-room door
refrigerated-room door
appropriate-thickness
plates
appropriate-thickness
plates
refrigerator body
corner caster
(rear wheel)
flooring
materials
wall surface
appropriate-thickness
plates
hanging-down door
adjustable legs
adjustable legs
specialized tool
refrigerated-room door
refrigerated-room door
NR-CY54AG_CY557G.indd 25NR-CY54AG_CY557G.indd 25 6/27/2559 BE 4:44 PM6/27/2559 BE 4:44 PM
To Next Page
Loading...
