Panasonic NV-DA1 - Page 12

No. Item / Part Fig. Removal (Screw &
Other)
(9) LCD Unit Fig.9-1 2-Screws (a)
Fig.9-2 4-Screw (b)
Fig.9-3 Remove the LCD Unit
from Side Case (R)
Unit.
Fig.9-4 4-Screws (c)
Fig.9-5 Disconnect the
following Connectors.
FP901, FP903, FP904,
FP905
Fig.9-6 3-Screws (d/e)
Unsolder the 2-Wires
from LCD panel.
(10) EVF Unit Fig.10-
1
4-Screws (f)
Remove the EVF Unit.
Fig.10-
2
4-Screws (g/h)
Remove the Eye Cap
holder and EVF Case
Unit.
Fig.10-
3
Disconnect the FP801.
Unlock----Locking
Tabs.
Remove the EVF-B
C.B.A.
Fig.10-
4
Unlock----Locking
Tabs for LCD Shield
Case.
Unlock----Locking
Tabs for EVF-A C.B.A.
Remove the EVF-A
C.B.A.and LCD Panel,
LCD Mask from EVF
Case Unit.
12