38
Copying on an S-VHS (or a VHS)
Cassette
(Dubbing)
After connecting the Movie Camera and the VCR as
illustrated at left, start the following procedures.
≥If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
≥Be sure to press the [OSD] Button (l 10) on the Remote
Controller prior to copying so that no indications are visible.
Otherwise, the displayed tape counter and function indications
are also copied.
Movie Camera:
1 Insert the recorded Cassette.
VCR:
2 Insert an unrecorded Cassette with an erasure
prevention tab.
≥If various setups (such as external input, tape speed, etc.)
are required, please refer to the operating instructions of
your VCR.
Movie Camera:
3 Press the [1] Button to start playback.
VCR:
4 Start recording.
5 Press the Pause or Stop Button to stop recording.
Movie Camera:
6 Press the [∫] Button to stop playback.
1 AV Cable
2 S-Video Cable (not supplied)
2, 4, 5
2
[AUDIO IN]
[S-VIDEO IN]
1
[VIDEO IN]
21-pin Adaptor
1, 3, 6
A/V OUT
PHONES
REMOTE
S-VIDEO
B-Eng.book 38 ページ 2003年2月14日 金曜日 午後2時43分