43
Recording with a Photo Title
Card Images can be recorded as the Photo Title in CAMERA
Mode.
1 Set [CAMERA FUNCTIONS] >> [PHOTO TITLE] >>
[MODE] >> [WIPE] or [MIX].
2 Set [CAMERA FUNCTIONS] >> [PHOTO TITLE] >>
[TITLE] >> [SET].
≥A list of Photo Titles is displayed. 1
3
Turn the [PUSH] Dial to select a desired title.
≥The selected Photo Title is underlined.
4 Press the [PUSH] Dial.
≥The selected Photo Title is shown on the entire screen and
the [PHOTO TITLE SET] Indication
2 appears for
approximately 3 seconds, and the screen goes back to the
Camera Mode screen.
5 Press the Recording Start/Stop Button.
≥[WIPE] or [MIX] screen is displayed at beginning of the
recording.
WIPE:
The Photo Title is replaced with the current scene in a wiping
motion.
MIX:
The Photo Title is replaced with the current scene in a gradual
mixing effect.
≥For other notes concerning this item, see page 52.
5
1, 2, 3, 4
1
123
4 5 6
PHOTO TITLE SET
PRESS STOP TO EXIT
M
E
N
U
2
PUSH
SHUTTER /
W B / IRIS/
MF / JOG
B-Eng.book 43 ページ ２００３年２月１４日 金曜日 午後２時４３分
To Next Page
Loading...
