Recording Mode
-31-
To Display the Multi-Pictures Again
Press the [MULTI] Button for 1 second or longer.
To Delete Multi-Pictures One by One
(When pictures were captured in [MANUAL])
When the [MULTI] Button is pressed for 1 second
or longer while the still pictures are displayed, the
pictures captured last is deleted continuously.
≥After still pictures are deleted one by one, they
cannot be displayed again.
≥For other notes concerning this item, see
-51-.
ª Picture-in-Picture Mode
You can display a sub-screen (still picture) inside
the screen.
1 Set [TAPE RECORDING MENU] >>
[DIGITAL] >> [EFFECT1] >> [P-IN-P].
2 Aim the Movie Camera at the scene you
want to capture and press the [P-IN-P]
Button
(10) to insert a small still picture.
≥A small still picture is displayed in a normal
picture.
≥If the [P-IN-P] Button is pressed again, the
small still picture is cleared.
≥For other notes concerning this item, see
-51-.
ª Wipe Mode and Mix Mode
Wipe Mode:
Like drawing a curtain, the still picture of the last
recorded scene gradually changes to the moving
image of a new scene.
(20)
MULTI/
P-IN-P
(10)
WIPE
WIPE
WIPE
Mix Mode:
While the moving image of a new scene fades in,
the still image of the last recorded scene
gradually fades out.
1 Set [TAPE RECORDING MENU] >>
[DIGITAL] >> [EFFECT1] >> [WIPE] or [MIX].
≥The [WIPE] or [MIX] Indication appears.
2 Press the Recording Start/Stop Button (42)
to start recording.
3 Press the Recording Start/Stop Button (42)
to pause the recording.
≥The last scene is stored in memory. The
[WIPE] or [MIX] Indication changes to [B]
or [C].
4 Press the Recording Start/Stop Button (42)
to restart the recording.
≥The last image of the previous scene
gradually changes to the new scene.
≥For other notes concerning this item, see
-51-.
MIX
MIX
MIX
(20)
(42)
15B-ENG.book 31 ページ ２００４年２月２日 月曜日 午後４時４５分
To Next Page
Loading...
