Editing Mode
-41-
Editing Mode
Recording from a Tape onto a Card
(NV-GS15 only)
Still pictures can be recorded on the Memory
Card from scenes that have already been
recorded on a cassette.
1 Set the Mode Dial (39) to Tape Playback
Mode.
2 Start playback and set the Movie Camera to
Still Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button
(36).
Recording Pictures from a Card onto
a Tape (NV-GS15 only)
Card Images can be recorded to the Tape.
1 Set the Mode Dial (39) to Picture Playback
Mode.
2 Display the first picture.
3 Press the [PHOTO SHOT] Button (36).
≥During the copying, the following Indication
appears.
≥It takes a few seconds to record a picture to
the Tape.
(39)
PHOTO SHOT
(36)
(39)
PHOTO SHOT
(36)
NOW RECORDING
≥When recording to tape, select the tape position
before recording. The picture will be recorded to
the tape position when the [PHOTO SHOT]
Button is pressed at Step 3.
≥Photoshot index signals are automatically
recorded.
≥For other notes concerning this item, see
-53-.
Audio Dubbing
(Remote Control only)
You can add music or narration to the recorded
Cassette.
≥If the tape recorded in the [16bit] Mode is
dubbed with the Audio Dubbing function, the
original sound is erased. (If you wish to
preserve the original sound, use the [12bit]
Mode when recording.)
≥Audio Dubbing cannot be performed on a
recording made in LP Mode. (
-19-)
1 Press the [;] Button (70) on the Remote
Controller where you want to add new
sound.
2 Press the [A.DUB] Button (56) on the
Remote Controller.
3 To start Audio Dubbing, press the [;]
Button
(70) on the Remote Controller.
To Cancel Audio Dubbing
Press the [;] Button (70) on the Remote
Controller.
The Movie Camera is in the Still Playback Mode
again.
INDEX INDEX
STOP
KL
∫
V
/REW
STILL ADV
W
sVOL r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAU SE
FF/
W
STILL ADV
61 5
;
ED
P.B. ZOOM
(56)
(70)
15B-ENG.book 41 ページ ２００４年２月２日 月曜日 午後４時４５分
To Next Page
Loading...
