To Next PageTo Next Page
Need help?Do you have a question about the Panasonic NV-MV40GL and is the answer not in the manual?
Covers general warnings, safety precautions, and battery handling for VCR operation.
Advises on proper operating environment, avoiding hazards, and managing condensation to prevent damage.
Details standard coaxial cable connections for signal input/output.
Explains how to connect using AV cables for improved picture and sound.
Specific instructions for performing auto tuning in New Zealand.
Specific instructions for performing auto tuning in Australia.
Explains how to reset the clock if it is slightly inaccurate.
How to select PAL, NTSC, or B/W for TV output.
How to enable/disable various on-screen indicators.
Options for tape length display and NTSC signal input/playback.
Settings for the Jet Navigator function and On Screen Display options.
Details how to use playback controls like Play, Fast Forward, Rewind, Pause.
How to repeat playback and play NTSC tapes on PAL TVs.
Explains SP, LP, and EP tape speed options.
How to pause recording and protect tapes from accidental erasure.
How to set date, time, channel, tape speed, and category for timer recording.
How to put the VCR into timer recording standby mode.
How to suspend timer standby and use the easy programming guide.
Setting weekly/daily and external signal timer recordings.
Explains automatic tape speed adjustment for full programme recording.
How to assign categories to programmes for easier searching.
How to delete all recorded programme data for a cassette.
Addresses issues with playback quality, recording failures, and remote control operation.
Guides on adjusting playback picture and cleaning video heads for optimal performance.
Covers general warnings, safety precautions, and battery handling for VCR operation.
Advises on proper operating environment, avoiding hazards, and managing condensation to prevent damage.
Details standard coaxial cable connections for signal input/output.
Explains how to connect using AV cables for improved picture and sound.
Specific instructions for performing auto tuning in New Zealand.
Specific instructions for performing auto tuning in Australia.
Explains how to reset the clock if it is slightly inaccurate.
How to select PAL, NTSC, or B/W for TV output.
How to enable/disable various on-screen indicators.
Options for tape length display and NTSC signal input/playback.
Settings for the Jet Navigator function and On Screen Display options.
Details how to use playback controls like Play, Fast Forward, Rewind, Pause.
How to repeat playback and play NTSC tapes on PAL TVs.
Explains SP, LP, and EP tape speed options.
How to pause recording and protect tapes from accidental erasure.
How to set date, time, channel, tape speed, and category for timer recording.
How to put the VCR into timer recording standby mode.
How to suspend timer standby and use the easy programming guide.
Setting weekly/daily and external signal timer recordings.
Explains automatic tape speed adjustment for full programme recording.
How to assign categories to programmes for easier searching.
How to delete all recorded programme data for a cassette.
Addresses issues with playback quality, recording failures, and remote control operation.
Guides on adjusting playback picture and cleaning video heads for optimal performance.
General| Type | VCR |
|---|---|
| Number of Heads | 4 |
| Signal-to-Noise Ratio | 45 dB |
| Weight | 3.2 kg |
| Tape Standard | VHS |
| Hi-Fi Audio | Yes |
| S-Video Output | Yes |
| Playback Speed | SP, LP |
| Inputs | Composite |
| Outputs | Composite, S-Video, Audio |
| Power Supply | 50/60Hz |
