10
Change the order of the Channel
positions and the names of the
TV station
Press |MENU|
Select [Tuning]
Access by pressing |ENTER|
Access [Manual] by pressing |ENTER|
Select the Channel to be changed
Access by pressing |ENTER|
Select the input field for [POS]
Input the Channel position
Store the setting by pressing |ENTER|
Select [Name]
Select the input field
Input the name of the TV station
selecting the first letter
Select the next letter
Select the next letter
.
To input an empty character, select the
blank character between Z and
*
.
Store the setting by pressing |ENTER|
Press |EXIT|
VCR Tuning
Setting the sound system
This system can receive transmissions which
are broadcast with NICAM sound.
This is a sound system with two sound channels
which broadcasts either stereo sound
or two separate mono channels
(M1 and M2).
Press |MENU|
Select [Tuning]
Access by pressing |ENTER|
Access [Manual] by pressing |ENTER|
Select the channel
Access by pressing |ENTER|
Setting a new Channel
Add / Delete / Move
a Channel on the list
Press |MENU|
Select [Tuning]
Access by pressing |ENTER|
Access [Manual] by pressing |ENTER|
Search for a Channel position
(for rapid search, keep the cursor button
pressed down), [Add] between Channels
using the button
and add by pressing |ENTER|
Access by pressing |ENTER|
Select the new Channel
Store by pressing |ENTER|
Select [Tuning] menu by pressing |MENU|
Select the Channel to be deleted
Select [Delete] by pressing the button
Delete by pressing |ENTER|
Select the Channel to be moved
Select [Move] by pressing the button
Move the Channel to the new position
Store this new position
by pressing |ENTER|
Press |EXIT|
Restart Automatic settings
Press |MENU|
Select [Tuning]
Access by pressing |ENTER|
Select [Auto - Setup Restart]
Press |ENTER|
Confirm by pressing |ENTER|
Restoring the original settings
of the VCR (Shipping condition)
Press |MENU|
Select [Tuning]
Access by pressing |ENTER|
Select [Shipping condition]
Press |ENTER|
Confirm by pressing |ENTER|
Disconnect the unit from AC mains
for one minute.
Note (Audio mode only for NV-VHD1EE): If there is no sound or if it is
distorted, you can try to adjust the [Audio mode] by selecting [ I ], [DK] or [BG]
To set generally the RFC system the same as TV system of the connected TV.
|MENU|, [Other settings]
,
|ENTER|, [RFC system]
, select the input field
,
select the setting
, |ENTER|, |EXIT|
Select [Mono]
Select the input field
Select the sound setting [ON] or [OFF]
Store by pressing |ENTER|
Press |EXIT|
Select the setting [Mono] to [ON] if you want
to record a normal mono sound on the
Hi-Fi tracks of the VCR, for example, if the
stereo sound is distorted through the reception
conditions.
Note: Distorted pictures, you can adjust with
[Fine tuning] and [Video system].
RQTD0035-A
Panasonic VCR
Main menu
Panasonic VCR
Tuning
Pos. Name Ch
33 ***33 37
34 - - - - - - - -
35 ***35 23
Delete Add Move
Timer recording
Tuning
Clock setting
Other settings
Panasonic VCR
Main menu
Panasonic VCR
Tuning
Manual
Auto - Setup Restart
Download
Shipping condition
Panasonic VCR
Tuning
Pos. Name Ch
33 ***33 37
34 - - - - - - - -
35 ***35 23
Panasonic VCR
Main menu
Timer recording
Tuning
Clock setting
Other settings
Panasonic VCR
Tuning
Manual
Auto - Setup Restart
Download
Shipping condition
Panasonic VCR
Tuning
Manual
Auto - Setup Restart
Panasonic VCR
Tuning
Manual
Auto - Setup Restart
Download
Shipping condition
Panasonic VCR
Main menu
Timer recording
Tuning
Clock setting
Panasonic VCR
Main menu
Timer recording
Tuning
Clock setting
Pos : 33
Name :
***
33
Channel : 124
Fine tuning : AUTO
Decoder : OFF
Video system : PAL
Mono : ON
Audio mode : BG
Pos : 34
Name :
- - - - -
Channel : 2
Fine tuning : AUTO
Decoder : OFF
Video system: PAL
Mono : OFF
Panasonic VCR
Tuning
Pos. Name Ch
1 ARD 2
2
ZDF
3
3N3 8
Pos : 1
Name :
ARD
Channel : 2
Fine tuning : AUTO
Decoder : OFF
Video system: PAL
Mono : OFF
Timer recording
Tuning
Clock setting
Other settings
To Next Page
Loading...
