VCR DVD
Recording
DVD
TV
VCR
AV
REMAIN
VCR
SP
VCR
EP
LP
SP
REC
DISPLAY
SP/LP/EP
A1:Scart input AV1
A2:Scart input AV2
A3:Front input AV3
dc: DVD (disc intern)
AV-channels
Set the TV set to the video channel and insert a cassette into the video recorder;
make sure that the cassette's protection tab is still in.
!
Select a channel to record from
!
Select the AV channel if you are recording via the 21-pin scart cable.
!
Press to start recording.
!
Press the Stop button to stop recording.
!
To pause recording:
!
To resume recording:
REC
The VCR display shows: time - counter - tape remain.
!
Press OSD/DISPLAY until 'REMAIN' is displayed.
Tape Remain counter/indicator
SP : normal recording time - optimal picture quality
LP : double recording time - simple picture quality
EP : triple recording time - reduced picture quality
D
When you play back LP or EP recordings, some cassettes (e.g. type)
may produce interference. This is not indicative of a malfunction.
E-300
!
Prior to starting the recording session, press to set the tape speed.SP/LP/EP
11
To Next Page
Loading...
