Service Information of OLED TV (Bottom Screw) -1
Screw Type
Specification of
Bottom screws
Working space
About 61 - 72mm
Screw position
1. Specifications of Bottom screws
The bottom of the rear cover
The surface of
the table
Cross recessed hexagon
head screw
8 mm
2 mm
84
It is necessary to pay attention to handling to prevent OLED panel bending. We recommend standing position with pedestal
when repairing. Some screws are placed on the bottom of the rear cover, it is difficult to remove them when standing with
pedestal. We propose how to remove bottom screws in next page.
2 positon
OLED
Working space : TH/TC-**FZ1000 / TX-**FZ950 = 72mm
TH/TC-**FZ950 / TX-**FZ800 = 61mm
To Next Page
Loading...
