Panasonic Omnivision PV-8450 - One Time VCR Setup

One Time VCR Setup
*lmportant: If the remote control POWER, ACTION,
PROG, CHA/T, INDEX, or ADD/DLT
button does not work when pressed,
press the VCR button on the remote and
try the button again.
1 Press ACTION to
display the menu.
2 Press AT to select
the language.
English: LANGUAGE
Spanish: IDIOMA
French: LANGUE
- MENU -
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
SET : ► KEY
END :ACT ION KEY
3 Press ^ repeatedly to change the language.
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNa
- MENU -
PREPARAR VCR
FIJACtON OE FUNCIOI
FIJAR RELOJ
FIJAfl CANAL
..MENU-
REGLAOE MAGNETOSCCPE
REQLAQE MAGNETO SUPPLEM
REGLAGE HORLOGE
REGLAGE CANAL
SELECT
SET
END
* Y KEY
► KEY
ACTION KEY
ELEGIR;* ▼
FIJAR : ►
TERMINAR:ACTION
[KaanaMitism franca i s
SEL. :* »
REGLER:»'
FIN ;ACT ION
4 Press ACTION to exit this mode.
To Add or Delete a Channel
1 Select a channel using the
NUMBERED keys to add
or CH A/ T to delete.
2 Press ADD/DLT to add
or delete the channel.
• To select a channel
once it’s deleted,
use the NUMBERED keys
on the remote control.
To Replace Channels in Memory
In case you have cable installed, etc.
1 Press ACTION* to display
the menu.
2 Press AT to select “SET
UP CHANNEL," and then
press ► t o display the
“SET UP CHANNEL" screen.
3 Press AT to select
“ANTENNA,” and then
press ► to set your antenna
system (TV or CABLE).
4 Press AT to select “AUTO
SET,” and then press ►
to display the “CHANNEL
CLOCK AUTO SEr screen.
■ If you use a cable box, turn
it on and set it to the PBS
channel in your time zone.
• To exit this mode,
press ACTION twice.
5 Press CH A to start
Channel Auto Set.
MENU
SET UP VCR
SET UP FEATURE
I DIOUA/LANQUE: ENGLISH
SELECT:A ▼ KEY
SET : ► KEY
END :ACT ION KEY
- SET UP CHANNEL -
^^TO^sir’
CHANNEL CAPTION
SELECT:* ▼ KEY
SET : ► KEY
END lACTtON KEY
(MNEL/CLOCX AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE 1T TO YOUR
LOCAL PBS CH THEN. ..
PLEASE PUSH CH UP KEY
• Clock Auto Set will be performed when channels are
replaced in memory. To cancel, press STOP when
“AUTO CLOCK SFt PROCEEDING” appears on-screen.
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Press ACTION to display
the menu.
2 Press AT to select “SET
CLOCK,” and then press ►
to display the “SET CLOCK”
screen.
3 Press AT to select
“MANUAL,” and then press
► to display the SET
CLOCK screen.
MENU
SET UP VCR
SET UP CHANNEL
ininUA/IANGliP FNGt l.W,
-SET CLOCK--
AUTOaOCK SET
SELECT:* ▼ KEY
SET : ► KEY
END :ACT ION KEY
4 Press AT and to select
and set the date, time, and
DST. (Daylight Saving Time).
5 Press ACTION twice to
stai1the_clQCk and exit
this mode.
SaECT:* T KEY
SET :* ► KEY
END :ACTION KEY
• For Auto Clock Set, select “AUTO CLOCK
SET,” and then press CH A in step 3.
When Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Press NUMBERED keys 100, then 2, then 5.
This VCR will accurately maintain its calendar up to Dec. 31,2096,11:59PM.
Normal TV or Cable channels are automatically selected and placed in memory depending on how your
VCR is hooked up.
14